4pcs 25mm/1inch Forged Aluminum Wheel Spacer 5x139.7 for Suzuki Samurai/Jimny/Vitara Please contact me I will give you a better price. Describe Quantity 4 Pieces (Included required bolts) Fits models Suzuki Manufacturing Methods Forged Material Choice 6061-T6 Aluminum Alloy Billet PCD(Bolt Pattern) 6x139.7 CB(Center Bore) 106mm Bolt/Stud Bolt Bolt/Stud Thread M12x1.25 Hub Centric Yes Thickness 25mm Color Choice Perfect Black Buy Benefits Buy BLOXsport Wheel Spacers, you will get the following unique experience. We hope that our products can work for you. Structure is more reasonable, more Match BLOXport team design different hub centric( Wheel-centric lip ) for different car models to increase the matching between wheel and spacer. Making the car at high speed, speed cross-country more secure and stable. More beautiful BLOXsport pay more attention to the detail of spacer, more rigorous process, using a higher level of surface treatment, surface protection-- Hard Anodized. Wheel spacers detail photos: Information transparency Our wheel spacer is truly forged 6061-T6 aluminum, they was made laser with a material number above. Bolts/Studs also are true of 10.9 grade that engraved with our trademarks. More secure Bolts/Studs BLOXsport supporting Bolts/Studs are more reliable, more comfortable and last longer=>anti-fatigue. This picture shows our bolt during the (1 million times) anti-fatigue test, it appears in the fracture process from big to small=>More toughness. More cost-effective The same level of material, our price is more reasonable; compared with the same quality of German brand, our prices cheaper. Longer warranty Forged Aluminum 6061-T6 Wheel Spacers: 5 years warranty; Forged Aluminum 7075-T6 Wheel Spacers: 10 years warranty. More carefully packaging The fastest delivery speed Ship out the products within 24 hours of payment being made (M-F only). More professional customers choice More and more customers believe in our profession, so choose us. More authority certificate (More reports please contact us) --Limited Life Range Limited Life Range is very important for Long life drive. Normally, The 10.9 Grade Wheel Bolts/Studs Only test the Tensile, Proof Load, Hardness. they are for Strength but NOT for Toughness, but in our view, the Toughness is as important as Strength .So, our Bolts/Studs passed 1 MILLION Times Fatigue Strength Test, For Safe, For long life Safe. --Anti-Rust Bolts/Studs/Nuts: Our Bolts/Studs/Nuts have been specially treated against RUST and thus beautiful and corrosion resistant(Normally 6 Years). Passed the 72 Hours NSS Test. BLOXsport VS Competitors ? BLOXsport ? wheel spacers have two aluminum materials, which are forged 6061-T6 (Tensile Strength 42,000-45,000 psi, Yield Strength 35,000-40,000 psi, Failure Elongation 8-10%, and Germany H &*, Eib* same material used) and forged 7075-T6 (Tensile Strength 74,000?78,000 psi, Yield Strength 63,000?69,000 psi, Failure Elongation 5-11%, and Germany Ham* same material used). ? BLOXsport ? bolt/stud has passed test, ISO3800, 1 million time anti-fatigue test to make sure the safety during long term use. ? BLOXsport ? bolt/stud/lug nut has passed test, ISO9227, 72hours Neutral Salt Spray Test test to make sure 6 YEARS does not rust under normal circumstances. Why Choose us? Our Products Competitor's Products High Quality Normal Quality Cheaper Quality Aluminum Material Forged Aluminum Billet. 7075-T6 6061-T6 Low-Pressure Aluminum die Casting 6061 Aluminum Gravity Casting (Aluminium Recycling) Bolts/Studs Material SCM435 / Same level Strength:10.9 Grade with Good Figure Strength ( 1 Million Times ) 40Cr / Same level Strength:10.9 Grade But BAD Figure Strength (Brittle Fracture) Q235/A3 (Too Bad, it should not be used.) Lug Nuts Material 45# Steel Strength:8 Grade With Heat-Treatment 35# Steel Strength:6-8 Grade Without Heat-Treatment Q235/A3 (Too Bad, it should not be used.) Anti-Rust Level 72 hours NSS Test SIX YEARS does not rust (Neutral Salt Spray Test) 24-36 hours NSS Test (Neutral Salt Spray Test) Below 24 hours NSS Test (Neutral Salt Spray Test) Design and Machining Circularity: 0.02mm Perpendicularity:0.05mm Parallelism:0.04mm Concentricity:0.05mm PCD trueposition:0.02mm 0.05mm-0.1mm Rough machining warranty 10 years warranty 5 years warranty 3 years warranty OEM Customization Provide these Informations: PCD( Pitch Circle Diameter ) CB(Centre Bore) Thickness Thread size Thread length Color NO NO FAQ Q1. What is the Tightening Torque for 10.9 Grade Bolts/Studs/Lug Nuts? M12:110-130NM, Reference113NM(83.3Ft-tb), Steel Wheels and Aluminum Wheels are same.M14:180-201NM, Reference 181NM(133.5Ft-tb) for Steel Wheels or 140NM (103.5Ft-tb) for Aluminum Wheels. Q2. Will installing Spacers wear out my wheel bearings faster than normal? No. BLOXsport Wheel Spacers will not cause premature wear of your wheel bearings. Inspect your bearings to make sure they are in good working condition before installing BLOXsport Wheel Spacers. Q3. How is the Machining Precision? Tolerance Range: Circularity: 0.02mm, Perpendicularity:0.05mm, Parallelism:0.04mm, Concentricity:0.05mm, PCD true position:0.02mm. Q4. What is the difference in Aluminum 6061-T6, 6082-T6 and 7075-T6? Model Tensile Strength Yield Strength Failure Elongation 6061 18,000 psi(125 Mpa) 8,000 psi (55 Mpa) 25-30% 6061-T6 42,000-45,000 psi (300-310 MPa) 35,000-40,000 psi (241-275 MPa) 8-10% 6082 19,000 psi(130 Mpa) 12,000 psi (85 Mpa) 27% 6082-T6 49,000 psi (340 Mpa) 30,000- 42,000psi (210-290 Mpa) 6-11% 7075 40,000psi (276 Mpa) 21,000 psi (145 Mpa) 9-11% 7075-T6 74,000?78,000 psi (510?572 MPa) 63,000?69,000 psi (434?503 MPa) 5?11% Sources:Wikipedia, Aalco... Q5. Can I run different size wheel spacers in the front and rear? Yes. Different size wheel spacers in the front and rear are very common. Often times the front and rear havedifferent requirements for optimal fitment. Q6. Will BLOXsport Wheel Spacers stop my tires from rubbing the fender lip? No. If your tire is rubbing your vehicle's fender lip it is possible that you have a tire or wheel fitment issue. Q7. Is wheel alignment necessary with BLOXsport Wheel Spacers? Wheel alignment is not necessary after installing BLOXsport Wheel Spacers. Q8. An important technical about this kind of spacer installation as the picture shows. WARNING for 15mm/20mm spacer: Because 15mm/20mm wheel spacer is smaller than the length of the standard studs. For proper installation, it is REQUIRED that the back of your wheels have small cavities in the mounting pad for our 15mm/20mm spacers. These cavities are needed so that the lug nuts and wheel studs can sit in this pocket. About BLOXsport We are BLOXsport brand in specialized Wheel Spacers/Wheel Adapters manufacture. We can produce whatever type of wheel spacer you like. For any size, for any Car/ATV/UTV. We have our own company, design team and factory. BLOXsport always insist on four concept respectively: 1.insistence on the service philosophy that safty is No.1 and creating the value for our customers. 2. insistence on designing and producing by ourselves in order to make sure the our product's stability of the quality and reliability. 3. insistence on the test from the third party. 4. insistence on requiring ourselves to live up to the highest standard among our rivals in order to make sure that our product will be in the perfect condition in our customer's hand (not only the best quality but also there's no scratch on our products which has been sent to our customers). --Show Room --Show Factory
Specifics
- Brand: BLOXsport
- Country/Region of Manufacture: China
- Manufacturer Part Number: BLM5139108
- Manufacturer Warranty: 10 Year
- Surface Finish: Anodizing
- Type: BLM5139108BLOX